Matrix "mini-i" Balanced DAC

Features

Remote control optional (New)
Standby using remote control or the control dial
Balanced structure with dual AD1955 24bit / 192kHz D/A converter units
Professional digital receiver chip of ultra-low jitter and an independent system clock
USB, AES/EBU, optical, coaxial digital inputs and a coaxial output
Up to 24bit / 192kHz digital input via coaxial and optical
Digital step volume controller that covers -90 to 0 dB (1 dB each step)
Both balanced and unbalanced output, which makes it possible to connect two sets of analog devices with different interfaces at the same time
Internal headphone amp unit can easily drive any headphones of 300 ohms and below
Large screen LCD panel displays user friendly information on current playback status and unit setting
Pre-amp mode and DAC mode selectable
While starting up or switching input channels, the volume will fade in to prevent shock and hearing damage caused by excessive volume
Displays track information when working with D-Sub code compatible CD players

Working Modes

“Pre” mode:

This is the default mode pre-set by the factory. Working under this mode, volume control is effective on all analog output ports. It is also very convenient to use your headphone under the pre-mode.

“DAC” mode:

Under this mode, all the analog output levels are of their standard value. To get the best sound performance, the headphone will be turned off under this mode.

“Setup” mode:

Press and hold the volume/channel select knob while turning on the device, the unit will enter setup menu. You can use the volume/channel select knob to select a working mode.

Specifications

Digital Input

Optical: Sealed Optical Input
Sampling Rate: 32 - 192 KHz
Coaxial (BNC): 75 Ω
Sampling Rate: 32 - 192 KHz
USB: Standard USB Connector
Sampling Rate: 32 - 48 KHz

Digital Output

Coaxial Output: Standard RCA jack
Sampling Rate: 32 - 192 KHz
Supports AC-3, DTS data output (pass through)
Output Level: 1Vp-p (75 Ω)

Analog Interface

RCA Output Level: 2.0VRMS
RCA Input Impedance: 47kΩ
Balanced Output Level: 0 - 4.0V adjustable (XLR: 1=GND, 2=HOT, 3=COLD
Frequency Response: 20 Hz - 20 KHz
SNR: 105dB
Dynamic Range: 108dB
Distortion: <0.0002% (1 KHz)

Power Requirements

Power: AC 220-240V 50/60Hz or AC 100-120V 50/60Hz
Power Consumption: <15W

Other Specifications

Weight: 1.3KG (device only); 2.0KG (shipping)
Dimensions: 20.5 x 15.5 x 4.8 (L x W x H cm)

Accessories

Power Cable (US/EU/AU optional)
User’s manual (Chinese/English)
BNC/RCA adapter

Reviews

Matrix Mini-i Balanced DAC+HP amp | Headfi

Matrix Mini-i Balanced DAC | Headfonia

Matrix mini-i Balanced DAC | Affordable Audio, Issue 48: December 2009

Matrix Mini-i | Headphonista

Matrix Mini-i DAC| Headfi